10-26-2008 11:19 PM - edited 03-04-2019 12:04 AM
Hi,
Please educate met about how to take backup of router when it is connected through console?
10-27-2008 01:35 AM
Hai,
is your requirement to take back up of running config.??if so
Router#show Run (you can copy and paste in a notepad.)
Or
in Hyperterminal there is on option of capturing the text (Tranfer capture text) give a file name (Router#show run)
am i able to fullfill the requremnt if not let us know ...
ujil
10-27-2008 01:36 PM
Another option (through the network, not the console) is to copy either the running config or the startup config to a TFTP Server.
#copy running tftp
then IOS asks you a few questions such as: IP address of the TFTP server, name of the new file,...
Of course, you should have a TFTP Server running at the IP address that you'll give.
plz rate if it helps.
10-27-2008 11:00 PM
Hi,
Thanks. Its works. Only I have the problem with the cable which I used for connecting to router to PC.
10-27-2008 11:08 PM
Thanks you very much.
It's works successfully.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide