Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to take backup of router

Hi,

Please educate met about how to take backup of router when it is connected through console?

4 REPLIES
Community Member

Re: How to take backup of router

Hai,

is your requirement to take back up of running config.??if so

Router#show Run (you can copy and paste in a notepad.)

Or

in Hyperterminal there is on option of capturing the text (Tranfer capture text) give a file name (Router#show run)

am i able to fullfill the requremnt if not let us know ...

ujil

Community Member

Re: How to take backup of router

Another option (through the network, not the console) is to copy either the running config or the startup config to a TFTP Server.

#copy running tftp

then IOS asks you a few questions such as: IP address of the TFTP server, name of the new file,...

Of course, you should have a TFTP Server running at the IP address that you'll give.

plz rate if it helps.

Community Member

Re: How to take backup of router

Hi,

Thanks. Its works. Only I have the problem with the cable which I used for connecting to router to PC.

Community Member

Re: How to take backup of router

Thanks you very much.

It's works successfully.

213
Views
8
Helpful
4
Replies
CreatePlease to create content