Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

HSRP and EIGRP Muticast QOS

How can I set QOS on EIGRP and HSRP traffic?

1 REPLY
Purple

Re: HSRP and EIGRP Muticast QOS

Hi Todd,

Create an access-list that matches on the addresses/ports used by each:

EIGRP: destination of 224.0.0.10

HSRP: runs on UDP 1985

access-list 101 permit ip any host 224.0.0.10

access-list 101 permit udp any any eq 1985

access-list 101 permit udp any eq 1985 any

Then create a class-map that matches using this ACL:

class-map EIGRP-HSRP

match access-group 101

Then, do whatever it is that you intend to do on this traffic using a policy-map.

Hope that helps - pls rate posts that help.

Regards,

Paresh

631
Views
5
Helpful
1
Replies
CreatePlease to create content