Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HSRP & GLBP

Hi Netpro

To have redundancy at Branch we opt VSAT link.Two WAN Links will terminate on different Routers. HSRP & GLBP are options. Can Expert advice with tips and share experience on subject.

1 REPLY
Hall of Fame Super Silver

Re: HSRP & GLBP

Hello Pratik,

object tracking is the tool that allows you to control who is active.

HSRP can be preferred if you want to use secondary link only as backup.

if you use GLBP both links will be used if multiple clients are present in the remote site client vlans.

first you need to understand if simple interface tracking is enough to detect loss of connectivity on primary link.

example for HSRP with simple interface tracking:

R1 primary link

int fas0/0

ip address 192.168.2.2 255.255.255.0

standby 2 address 192.168.2.2

standby 2 priority 105

standby 2 preempt

standby 2 track interface "wan"

R2 secondary router

int fas0/0

ip address 192.168.2.3 255.255.255.0

standby 2 address 192.168.2.2

standby 2 priority 100

standby 2 preempt

if primary is MPLS this can be enough.

for detecting an indirect failure on MPLS network you should use an IP SLA to track with an ICMP probe if for example a server on central site is reachable

see for enhanced object tracking

http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_eot.html

Hope to help

Giuseppe

109
Views
4
Helpful
1
Replies
CreatePlease login to create content