You will need multiple group when you want to HSRP load balancing across the 2 routers. The way to acheive is, you can configure even number of Vlan active on one router and odd vlans as standby on this and odd vlans as active on second router and even vlans standby on this. This is the way we can achieve HSRP load-balancing.
on R1, Vlan 1,3,5,7 are active with priority 200 and vlan 2,4,6,8 are standby with priority 100.
On R2, Vlan 1,3,5,7 are standby with priority 100 and vlans 2,4,6,8 are active with priority 200.
This can only be achieved if you use a serate group for each Vlan. Like group 10 for vlan 1, group 20 for vlan 2 and so on....
Yes, You are right. Remember the Virtual IP of the HSRP will be same on both the L3 switches. Now depending on which group is active on a router, the request will be forwarded to that router and will do the inter-vlan routing.
To take your EG : The traffic for Vlan1 will be send to Switch1 and traffic for Vlan 2 will be send to Switch2 and hence load-balancing will work.
Amit, just one doubt in this. Virtual IP for VLAN 1 will be different and Virtual IP for VLAN 2 will be different. So for VLAN 1 if priority is core 1 = 110 and core 2 = 100, then core 1 will forward the traffic. And for VLAN 2, if priority is core 1 = 100 and core 2 = 110, then core 2 will forward the traffic.
Will it work like this or am I thinking on some wrong line
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.