Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

HSRP in Metro Ethernet link

Hi ,

We have MAN network as primary communication link and T1 serial and secondary link. Can anyone update me how to track the metro ethernet link in HSRP ?

Because most causes primary MAN communication link is not releasing its HSRP state during the outage. Still the interface will be looking as interface and line protocol UP/UP.

Whether any options are available to track the metro ethernet link ?

Regards,

Bala

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: HSRP in Metro Ethernet link

Bala,

You can configure IP SLA to monitor a remote IP address for reachability. You can associate this SLA to HSRP with the 'standby track' command.

http://www.cisco.com/en/US/docs/ios/ipapp/command/reference/iap_s5.html#wp1156911

Regards,

Edison

2 REPLIES
Hall of Fame Super Bronze

Re: HSRP in Metro Ethernet link

Bala,

You can configure IP SLA to monitor a remote IP address for reachability. You can associate this SLA to HSRP with the 'standby track' command.

http://www.cisco.com/en/US/docs/ios/ipapp/command/reference/iap_s5.html#wp1156911

Regards,

Edison

Community Member

Re: HSRP in Metro Ethernet link

Hi Edison,

Thanks for the update.

1071
Views
5
Helpful
2
Replies
CreatePlease to create content