Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HSRP Issue

Below is the switch diagram. As you can see, sw01 is directly connected to SW02 and sw02 is also connected to SW03.

SW01 <-----> SW02 <----> SW03

Each switch has three VLAN's.

SW01: VLAN1: 10.10.1.1 , VLAN2:10.10.2.1 and VLAN3: 10.10.3.1

SW02: VLAN1: 10.10.1.2 , VLAN2: 10.10.2.2 and VLAN3: 10.10.3.2

SW03: VLAN1: 10.10.1.3 , VLAN2: 10.10.2.3 and VLAN3: 10.10.3.3

I have two questions about HSRP.

1. Can I run HSRP for VLAN 2 on three switches?

2. Can I run HSRP for VLAN2 on Sw01 and SW03 even thought they are not directly connected each other?

Please advise.

2 REPLIES

Re: HSRP Issue

Hi,

1- Yes you can.

2- Yes you can as long as they have IP reachability.

HTH

Mohamed

Re: HSRP Issue

Below is the switch diagram. As you can see, sw01 is directly connected to SW02 and sw02 is also connected to SW03.

SW01 <-----> SW02 <----> SW03

Each switch has three VLAN's.

SW01: VLAN1: 10.10.1.1 , VLAN2:10.10.2.1 and VLAN3: 10.10.3.1

SW02: VLAN1: 10.10.1.2 , VLAN2: 10.10.2.2 and VLAN3: 10.10.3.2

SW03: VLAN1: 10.10.1.3 , VLAN2: 10.10.2.3 and VLAN3: 10.10.3.3

I have two questions about HSRP.

1. Can I run HSRP for VLAN 2 on three switches?

2. Can I run HSRP for VLAN2 on Sw01 and SW03 even thought they are not directly connected each other?

Please advise.

Hi,

You can run HSRP for vlan 2 on three switches and also you can run HSRP on sw1 and sw3 till you have reachablity of the interface ip's of the switches.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094e90.shtml

Hope to Help !!

Ganesh.H

Remember to rate the helpful post

144
Views
0
Helpful
2
Replies
CreatePlease to create content