09-09-2007 08:39 PM - edited 03-03-2019 06:40 PM
Dear All,
I have configure 2 4503 switch into HSRP mode , they are working alright,I have one confusion that is what will the VTP mode should both the switch work,iI have configured one as server ,and other as client,when i test my hsrp,it works ,but i am not able to see all vlan in standby switch.kindly help.
Regards
Amit kulshrestha
Solved! Go to Solution.
09-10-2007 02:46 AM
Hi
No u r standby will not work as a server,it will be in client mode.
If these swithes are u r core,then configure them to be as vtp servers one as a primary and other as secondry.
Thanks
Mahmood
09-09-2007 08:53 PM
I don't think your problem is related to HSRP so the title is a bit misleading.
Let's see the output from the following commands on both switches:
show int trunk
show vtp status
show vtp password
show vlan
Thanks
09-09-2007 11:25 PM
Friend Edison , your question has solved my problem,I have forgot to give vtp password on standby switch which i have configured as vtp client.now i am able to see all vlan in standby switch.thanxs.But I have 1 more query ,if my active fails ,will my standby switch will work as vtp server or client ,or how it will server my vlan .
thanxs for youe help.
amit
09-10-2007 02:46 AM
Hi
No u r standby will not work as a server,it will be in client mode.
If these swithes are u r core,then configure them to be as vtp servers one as a primary and other as secondry.
Thanks
Mahmood
09-10-2007 04:42 AM
Amit,
The VTP assignment is not dynamic. If you only have 2 switches, I recommend configuring both as VTP servers.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: