Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

HSRP Problem

Dear All,

I have configure 2 4503 switch into HSRP mode , they are working alright,I have one confusion that is what will the VTP mode should both the switch work,iI have configured one as server ,and other as client,when i test my hsrp,it works ,but i am not able to see all vlan in standby switch.kindly help.

Regards

Amit kulshrestha

1 ACCEPTED SOLUTION

Accepted Solutions

Re: HSRP Problem

Hi

No u r standby will not work as a server,it will be in client mode.

If these swithes are u r core,then configure them to be as vtp servers one as a primary and other as secondry.

Thanks

Mahmood

4 REPLIES
Hall of Fame Super Bronze

Re: HSRP Problem

I don't think your problem is related to HSRP so the title is a bit misleading.

Let's see the output from the following commands on both switches:

show int trunk

show vtp status

show vtp password

show vlan

Thanks

Re: HSRP Problem

Friend Edison , your question has solved my problem,I have forgot to give vtp password on standby switch which i have configured as vtp client.now i am able to see all vlan in standby switch.thanxs.But I have 1 more query ,if my active fails ,will my standby switch will work as vtp server or client ,or how it will server my vlan .

thanxs for youe help.

amit

Re: HSRP Problem

Hi

No u r standby will not work as a server,it will be in client mode.

If these swithes are u r core,then configure them to be as vtp servers one as a primary and other as secondry.

Thanks

Mahmood

Hall of Fame Super Bronze

Re: HSRP Problem

Amit,

The VTP assignment is not dynamic. If you only have 2 switches, I recommend configuring both as VTP servers.

123
Views
5
Helpful
4
Replies
CreatePlease to create content