Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

HSRP with Load sharing and redundancy

Hi All Manish this side,

I just want to know that can we achive load sharing and redundancy both, while using HSRP.

5 REPLIES
Cisco Employee

Re: HSRP with Load sharing and redundancy

Hey Manish,

Yes you can achieve both using HSRP. To achieve load balancing you have to configure MHSRP.

http://www.cisco.com/warp/public/619/7.html

http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs009.htm

HTH

Ankur

*Pls rate all helpfull post

Re: HSRP with Load sharing and redundancy

Thanks Ankur,

One more thing can we use ip address instead of preempt in this command "standby 1 preempt".

and which series of routers that we can configure it.

Cisco Employee

Re: HSRP with Load sharing and redundancy

Hi Manish,

You have to have to configure standby ip address and it is the whole purpose of HSRP which gives a virtual ip address. So once ip address is configured then you have to configure "preempt" keyword basically reinitiates election process.

So you have to configure something like this

standby 1 ip

standby 1 preempt

Check the configuartion section

http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs009.htm#wp3330

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swhsrp.htm

HTH

Ankur

*Pls rate all helpfull post

Re: HSRP with Load sharing and redundancy

Hi Ankur,

Thanks for helping get this idea, although had learnt about this, but never got this idea to implement the same.

Cisco Employee

Re: HSRP with Load sharing and redundancy

Hey Sam,

You are always welcome and thanks for appreciating my effort.

Regards,

Ankur

334
Views
0
Helpful
5
Replies
CreatePlease to create content