03-02-2006 05:16 PM - edited 03-03-2019 11:56 AM
Can we use both HSRP and primary link at the same instance for load sharing...
03-02-2006 07:23 PM
Hi,
Didnt get exactly what you are looking for. You generally configure HSRP on your LAN side for the High avaialbility. You donot configure the HSRP on the serial/WAN interfaces.
If more questions, Pls. revert.
regards,
-amit singh
03-04-2006 02:35 AM
If you meant load balancing between both routers, than HSRP cannot do that. Only one active router is allowed in HSRP. You can try GLBP:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t15/ft_glbp.htm
But if you have 4 VLANs for example, you can make one router active for 2 VLANs and the other router active for the other 2 VLANs.
03-04-2006 03:25 AM
you can achieve load balancing as well as high availability with HSRP but you shd run two process on bothe the routers making one standy of the other & vice versa
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_configuration_example09186a0080094e90.shtml
check this for detail info
regards
Haris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: