09-09-2006 09:10 AM - edited 03-03-2019 01:55 PM
Hi All
I have cisco 2621 router with IOS version of 12.1.
My office has Web/FTP server setup on private ip range. So i did NAT using
"ip nat inside source static tcp 192.168.1.11 21 xx.xx.xx.xx 21 extendable"
so i can access FTP from outside. I also wan my webserver setup from outside. I gave same command line for port number 80, 53 [TCP/UDP], as DNS is also maintained locally only....
Is there else config required to let HTTP work by domain name..
Thanks,
Dhaval Tandel
09-09-2006 09:16 AM
Dhaval,
You need to contact a DNS hosting company and have them host this internet domain name for you. They can create an 'A' host pointing to the public ip address you assigned to the router.
Your internal DNS won't help resolving this IP since the clients are coming from the outside.
You are done as far as Cisco config from the router side.
---
Please rate helpful posts.
Thanks
09-09-2006 09:19 AM
HI EdisonOrtiz
Thanks for quick reply....
So Cisco Config is done...
Thanks
Dhaval Tandel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide