I expect your help by giving clue how to achieve the traffic as described below: (Also find the attached Diagram)
It is a Hub & Spoke topology. Branch office-1 is able to communicate with Branch office -2 thru Hub Router. Now I want to change the traffic flow such a way that if Branch office-1 wants to communicate with Branch office -2 traffic should go to Firewall which is placed behind the Hub Router (Pl. find the attached Diagram) do all the security check and then allowed to reach Branch office -2 .The same is applicable vice versa.
Putting in simple words, Inter Branch office traffic should pass only thru Firewall and not directly using Hub Router itself.
Hope you will share your valuable ideas and discuss
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...