Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Hub-spoke which hub as eigrp stub

Hi there,

I have a simple question. In hub-spoke, would it be possible to configure all routers including hub as eigrp stub if hub does not to advertise spoke's subnets to other routers (outside of hub-spoke)? Could anyone please clarify it for me?

Thanks,

Nitass

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Hub-spoke which hub as eigrp stub

Nitass

In general it would not be good to configure the hub router as an EIGRP stub. If there were no router in the Enterprise other than the hub and the spokes then probably it would work. But if there is any other router - any Internet router, or other router at headquarters or anywhere then it is problematic for the hub to be configured as EIGRP stub.

HTH

Rick

2 REPLIES
Hall of Fame Super Silver

Re: Hub-spoke which hub as eigrp stub

Nitass

In general it would not be good to configure the hub router as an EIGRP stub. If there were no router in the Enterprise other than the hub and the spokes then probably it would work. But if there is any other router - any Internet router, or other router at headquarters or anywhere then it is problematic for the hub to be configured as EIGRP stub.

HTH

Rick

New Member

Re: Hub-spoke which hub as eigrp stub

Rick,

Thanks for clarification. I got it. :-)

Nitass

115
Views
0
Helpful
2
Replies