09-10-2009 09:44 AM - edited 03-04-2019 06:00 AM
Hi there,
I have a simple question. In hub-spoke, would it be possible to configure all routers including hub as eigrp stub if hub does not to advertise spoke's subnets to other routers (outside of hub-spoke)? Could anyone please clarify it for me?
Thanks,
Nitass
Solved! Go to Solution.
09-10-2009 10:10 AM
Nitass
In general it would not be good to configure the hub router as an EIGRP stub. If there were no router in the Enterprise other than the hub and the spokes then probably it would work. But if there is any other router - any Internet router, or other router at headquarters or anywhere then it is problematic for the hub to be configured as EIGRP stub.
HTH
Rick
09-10-2009 10:10 AM
Nitass
In general it would not be good to configure the hub router as an EIGRP stub. If there were no router in the Enterprise other than the hub and the spokes then probably it would work. But if there is any other router - any Internet router, or other router at headquarters or anywhere then it is problematic for the hub to be configured as EIGRP stub.
HTH
Rick
09-10-2009 11:05 AM
Rick,
Thanks for clarification. I got it. :-)
Nitass
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide