08-10-2010 02:45 AM - edited 03-04-2019 09:22 AM
Hi there,
Cisco documents shown that Cisco 3845 able to support HWIC-1FE with certain minimum IOS version, but why when I slot in the card, its show the following??? Thanks for the help.
WIC Slot 0:
Unknown WAN daughter card
WIC module not supported/disabled in this slot
Hardware Revision : 2.0
Top Assy. Part Number : 800-27737-02
Part Number : 73-10676-02
Board Revision : B0
Deviation Number : 0
Fab Version : 02
PCB Serial Number : FOC1428365G
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : HWIC-1FE
Version Identifier : V01
CLEI Code : COUIAFTCAA
Base MAC Address : d0d0.fd5e.e135
MAC Address block size : 1
Connector Type : 01
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 05 3A 41 02 00 C0 46 03 20 00 6C 59 02
0x10: 82 49 29 B4 02 42 42 30 88 00 00 00 00 02 02 C1
0x20: 8B 46 4F 43 31 34 32 38 33 36 35 47 03 00 81 00
0x30: 00 00 00 04 00 CB 92 48 57 49 43 2D 31 46 45 20
0x40: 20 20 20 20 20 20 20 20 20 89 56 30 31 20 D9 02
0x50: 40 C1 C6 8A 43 4F 55 49 41 46 54 43 41 41 CF 06
0x60: D0 D0 FD 5E E1 35 43 00 01 05 01 FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Solved! Go to Solution.
08-10-2010 05:46 AM
What version of IOS are you running?
08-10-2010 05:46 AM
What version of IOS are you running?
08-10-2010 06:16 AM
Hi there,
I tested with 2 IOS, "c3845-ipbase-mz.124-17b.bin" and "c3845-advipservicesk9-mz.124-25b.bin", both show the same result.
regards,
joe
08-10-2010 07:22 AM
Joe
I don't know whether this has been resolved as it is marked as resolved but you need a minimum of 12.4T and you have 12.4 so you need to upgrade the IOS, see Table 1A in this link -
Jon
08-10-2010 07:35 PM
Hi Jon,
You are right, the module only able to detect with IOS release T, others IOS not able to work. thanks for your great support.
regards,
joe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: