HWIC-3G-GSM 2801

[Elettrodigital]

I have a problem with the configuration of hwic-3d-gsm in a router 2801 ver. IOS 12.4 (22) T.

I do not accept the following command:

show all cellular 1/0/0

Why?

[Elettrodigital]

***********Sorry*************

I have a problem with the configuration of hwic-3d-gsm in a router 2801 ver. IOS 12.4 (22) T.

I dont accept the following command:

show cellular 1/0/0 all

Why?

[jennyjohn]

Which slot did you put your HWIC-3G-GSM card in? If it is slot 1, then you will have to type

show cellular 0/1/0 all

If it is slot 0, then it won't work because HWIC-3G-GSM card is not supported on slot 0

In 2801 router HWIC cards are only supported only in slot 1 and slot 3

[dgroscost]

IOS looks good, try another slot.

Here's a sample config:

interface Cellular0/2/0

bandwidth receive 3600000

ip address negotiated

ip access-group 100 in

ip virtual-reassembly

encapsulation ppp

no ip mroute-cache

dialer in-band

dialer idle-timeout 180

dialer string GSM

dialer-group 1

async mode interactive

no ppp lcp fast-start

ppp chap hostname cisco@wwan.ccs

ppp chap password 0 123456

ppp ipcp dns request

crypto map

chat-script GSM "" "ATDT*98*1#" TIMEOUT 60 "CONNECT"

access-list 1 permit any

dialer-list 1 protocol ip list 1

line 0/2/0

access-class 100 in

exec-timeout 0 0

password 0 xxxxxx

script dialer GSM

login

modem InOut

no exec

transport preferred none

transport output none

rxspeed 3600000

txspeed 384000