Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

HWIC-3G-HSPA- G dont support command 3G

Dears ,

what can i do to make ( HWIC-3G-HSPA-G ) support the ( # cellular 0/0/0 gsm band wcdma-1-imt-2000 ) to convert to 3G signals

I have 90 Router cisco 2811 and IOS    c2800nm-ipbasek9-mz.151-1.T.bin   

when write this command shows only

namerouter#cellular 0/0/0 gsm band ?

  auto-band         Auto Band

  gsm-all-bands     GSM all bands

  gsm-egsm-dcs      GSM EGSM/DCS Band

But another router have same IOS but anothe part of HWIC ( HWIC-3G-HSPA )  when write this command shows .

anotherrouter#cellular 0/0/0 gsm band ?

  auto-band         Auto Band

  gsm-all-bands     GSM all bands

  gsm-egsm-dcs      GSM EGSM/DCS Band

  wcdma-1-imt-2000  WCDMA I IMT 2000 (EU) Band

So please what can I do to make HWIC-3G-HSPA-G support this command # cellular 0/0/0 gsm band wcdma-1-imt-2000

thanks for help .

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: HWIC-3G-HSPA- G dont support command 3G

Yes. It is fixed on 15.1(3)T1 or 15.1(4)M

Haihua

7 REPLIES

HWIC-3G-HSPA- G dont support command 3G

Dears ,

  please  anyone reply to solve that problem .

thanks

New Member

Re: HWIC-3G-HSPA- G dont support command 3G

What have tried allready?
The hwic has iTS own firmware, did you compare? ( show cellulair........)
Have you swapped SIM cards?

Sent from Cisco Technical Support iPad App

Bronze

HWIC-3G-HSPA- G dont support command 3G

Hello Mohamed,

You may be hitting the next bug:

HWIC-3G-HSPA-G // missing wcdma option for "cellular gsm band"

CSCtj66513

Description

Symptom:

Cellular x/x/x gsm band does not provie WCDMA option to choose

Conditions:

HWIC-3G-HSPA-G

All IOS 15.x that supports HWIC-3G-HSAP-G

Workaround:

n/a

Link

------

https://tools.cisco.com/bugsearch/bug/CSCtj66513

Please look for the known fixed releases

Haihua

New Member

Re: HWIC-3G-HSPA- G dont support command 3G

can i solve the problem with  change the release of firmware or not.

Please if Yes advice with release Version.

Thanks,

Bronze

Re: HWIC-3G-HSPA- G dont support command 3G

Yes. It is fixed on 15.1(3)T1 or 15.1(4)M

Haihua

HWIC-3G-HSPA- G dont support command 3G

Dear Haihua ,

     thanks for your support , I upgreaded the IOS to 15.1(4)M and work well and we can now to push the signal 3G .

thanks

Mohamed Elkshek

Bronze

Re: HWIC-3G-HSPA- G dont support command 3G

You are so welcome

Best regards,

Haihua

442
Views
0
Helpful
7
Replies
This widget could not be displayed.