Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

HWIC-4B-S/T

Hi,

I have installed on HWIC-4B-S/T module in Cisco 3825 router,but the router is not detecting the module.....Please urgent help is required.....

regards,

4 REPLIES
Hall of Fame Super Silver

Re: HWIC-4B-S/T

Hello Venkataraman,

post a sh ver of your router

have you powered off the router before inserting the HWIC?

Hope to help

Giuseppe

Re: HWIC-4B-S/T

Hi Giuseppe,

Once I get the sh ver I will be forwarding it to you,meantime the IOS ver is 12.3,will it support?

regards,

Re: HWIC-4B-S/T

Hi Giuseppe,

Please see the below attached SH VER out put.

Cisco IOS Software, 3800 Software (C3825-SPSERVICESK9-M), Version 12.3(11)T8, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Thu 06-Oct-05 06:13 by kehsiao

ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)

BNC-Router-c3825 uptime is 3 hours, 1 minute

System returned to ROM by power-on

System restarted at 11:17:26 UTC Sun Oct 18 2009

System image file is "flash:c3825-spservicesk9-mz.123-11.T8.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 3825 (revision 1.0) with 227328K/34816K bytes of memory.

Processor board ID FCZ0943732L

2 Gigabit Ethernet interfaces

4 Serial interfaces

3 ISDN Basic Rate interfaces

1 ATM interface

DRAM configuration is 64 bits wide with parity enabled.

479K bytes of NVRAM.

62720K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

The router is not accepting HWIC-4T module also.

Regards,

Hall of Fame Super Gold

Re: HWIC-4B-S/T

You need to update your old IOS.

262
Views
0
Helpful
4
Replies
CreatePlease to create content