Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HWIC-4ESW and MULTI-VRF (vrf lite)

Hi,

can I configure the HWIC-4ESW to operate in different vrfs (lite) on a Cisco 1841 ?

Carsten

2 REPLIES
Silver

Re: HWIC-4ESW and MULTI-VRF (vrf lite)

I think it supports different lite's. But the following document has in it all relevant details with HWIC-4ESW.This might provide you with your required information.

http://www.cisco.com/en/US/products/ps5853/products_qanda_item0900aecd8016c026.shtml

New Member

Re: HWIC-4ESW and MULTI-VRF (vrf lite)

I am also endeavouring to use this module (on a 3825) and need to assign a single port to a VRF. The document mentioned does not specifically cover this topic.

The port is successfully placed into the vrf (and vlan). In the vrf arp table a pc connected to the port can be seen by its MAC address but no IP traffic is able to flow.

Has anyone had a positive result and managed to have a port in a VRF and get IP connectivity?.

302
Views
0
Helpful
2
Replies
CreatePlease login to create content