Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

HWIC-4T1/E1

The documentation seems straightforward, but can anyone confirm the HWIC-4T1/E1 module can be used to bond multiple DS1s that might otherwise be terminated on multiple HWIC-1DSU-T1 modules?

 

thank you

 

Bill

1 ACCEPTED SOLUTION

Accepted Solutions

This data sheet says

This data sheet says multilink PPP right at the top. That is what you'll likely need for bonding. http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/product_data_sheet0900aecd80710c77.html
1 REPLY

This data sheet says

This data sheet says multilink PPP right at the top. That is what you'll likely need for bonding. http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/product_data_sheet0900aecd80710c77.html
73
Views
0
Helpful
1
Replies
CreatePlease to create content