I HAVE A 3845 ROUTER RUNNING C3845-ADVIPSERVICESK9-M. i inserted the first HWIC card on it and it was working normmal. I purchased another HWIC card and inserted on it, the router detected it but it does not transmit data. tried with several HWIC card the same thing even with different slots. the same experience with 2800 router i have. please can't this be done or what could be the problem
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...