Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HWIC not showing after upgrading IOS

HI,

I have Cisco 2801 router with IP Base image, i have upgraded its image into advance Ip services for using IP SLA features but after upgradation HWIC card not showing in configuration.

When i recall IP base image then configuration show presence of HWIC card but with advance IP services HWIC card not showing.

Kindly advice.

BR,

Arshad Ahmed

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

HWIC not showing after upgrading IOS

What is the HWIC card (exact part number)?

What is the exact IOS (post the "sh version" if you're not sure)?

Hall of Fame Super Gold

HWIC not showing after upgrading IOS

Right-o.  You need a minimum of 12.4(20)T (IP Base feature set) to get to work.

1- and 2-Port Fast Ethernet High-Speed WIC for Cisco Integrated Services Routers

8 REPLIES

Re: HWIC not showing after upgrading IOS

You need to research the hardware supported for the specific version of ios and the specific hardware you are using.

Sent from Cisco Technical Support iPad App

New Member

Re: HWIC not showing after upgrading IOS

Hi Arshad,

Hope you have not downgraded the IOS version in the process of upgrading the featureset. Post here the current and previous image names.

Regards,

Talha

Hall of Fame Super Gold

HWIC not showing after upgrading IOS

What is the HWIC card (exact part number)?

What is the exact IOS (post the "sh version" if you're not sure)?

New Member

Re: HWIC not showing after upgrading IOS

Dear All,

Kindly note down the IOS, ROUTER and HWIC details.

Router PID: CISCO2801 VO5

Previous IOS : c2801-ipbase-mz.124-15.T10

Current IOS :  c2801-advipservicesk9-mz.124-25a.bin

HWIC : HWIC-1FE

Regards,

Arshad Ahmed

Hall of Fame Super Gold

HWIC not showing after upgrading IOS

Right-o.  You need a minimum of 12.4(20)T (IP Base feature set) to get to work.

1- and 2-Port Fast Ethernet High-Speed WIC for Cisco Integrated Services Routers

New Member

HWIC not showing after upgrading IOS

Hi Leo,

Thanks for reply.

As is need IP SLA feature so i have to implement c2801-advipservicesk9-mz.124-20.T.bin

but it require DRAM/FLASH 192/64 but memroy present in my Cisco 2801 is 128/64.

Regards,

Arshad Ahmed

Hall of Fame Super Silver

HWIC not showing after upgrading IOS

Arshad Ahmed

Clearly you have conflicting requirements. The features that you want require a version of code that requires physical resources greater than what your router has. There are only a couple of alternatives and you may not like any of the alternatives:

- you can upgrade RAM and flash.

- you can choose which of the features you can get along without (have the IP SLA without the WIC or have the WIC without the IP SLA).

HTH

Rick

New Member

HWIC not showing after upgrading IOS

Dear all,

Thanks for your helpfull reply.

I have order for DRAM and FLASH in this regards.

Regards,

Arshad Ahmed

515
Views
0
Helpful
8
Replies