This is my recent problem i faced in my network by having loops created in network and network going shut or performence fail for some sites.
In details , my network is having two 7600 routers connected to service provider by BGP with 4 and 2 MB link respectively.I use EIGRP at my core switch ,for my internal network. My getting routes from all my remotes sites on both links if used shutting down one router.If both routers are switched on,my both routers are learing same routes and creating loops in network and network fails.
Some how i found that i can make load balancing by using IBGP between two routers.
Couldn anyone please let me knew further detail process for same.
with above configuration am able to put up my network transmitting well,but when i switch on my second router the loops are found and network gets down.please let me knew the simple method with minimum down time to remove my loopps and utilize both links of 4 and 2 mbps in my network to same ISP.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...