Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Identifying Cisco Router Interface Cables

Hi,

We use 3700 (Data) and 2800 (Voice) router for our clusters via telnet remote access, I want to know what commands to use to verify what type of cable is plugged into the WAN Interfaces.

IOS version is 12.3 and show controller doesn't seem to show any type of cable such as X.21 or Cat5/6.

Thanks

2 REPLIES
Bronze

Re: Identifying Cisco Router Interface Cables

I think these both command will work: show controllers cbus and show controllers serial 1/0.

Hall of Fame Super Gold

Re: Identifying Cisco Router Interface Cables

Peter

I am not sure that there is any command that will show the cable type for X.21 or Cat5/6. I have seen show controller serial give helpful information about the cable attached. But I am not sure that some of what you are looking for is available.

HTH

Rick

237
Views
0
Helpful
2
Replies
CreatePlease to create content