Sorry if this is off topic here. My customer has some 2960s and 3560s that they bought a few years back and now they need "IEC 60950" test reports for these units. Cisco Partner Help On Line [Incident: 090706-000240] got me what I needed for 2960 but the 3560 report was not sufficient. I kept after them but to no avail. I was referred to my CAM but it seems I don't have one as it is early in Cisco's fiscal year. My old CAM referred me Ingram who gamely gave it a shot but they failed as well. I've
attached what PHOL gave me and I need a report like the one that was given to me for the 2960 (see attached). What I need is for a 3560 product manager to read this and dig it out of his
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...