i have a LAN, witch 4507, and 18 cisco 2960, all running in basic ios image((cat4500e-IPBASE-M), Version 12.2(50)SG3) ((C2960-LANBASEK9-M), Version 12.2(44)SE6 ), all acces switch are connected with the Giga 0/1 port to the core switch with Fiber.
i have 18 Vlans, the Vlan 4 is fir the IP camera, and encodeur, the Vlan 6 is for the camera client, our encodeur use multicast to diffude a video to the clients in VLAN 6, and i have a probleme when the encoder when i watch more 6 camera at the same time ( 1 camera use 4 Mb/s ),
i need the configuration to put in the core and acces Switch, to reduce a multicast in my network,
i pute this configuration but its dosnt work:
in the acces switch :
ip igmp snooping vlan 4 mrouter interface Gi0/1 ip igmp snooping vlan 6 mrouter interface Gi0/1
in the core switch :
interface Vlan4 ip address 10.0.4.200 255.255.255.0 ip pim sparse-dense-mode ip igmp version 3
interface Vlan6 ip address 10.0.6.200 255.255.255.0 ip pim sparse-dense-mode ip igmp version 3
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...