If I have 2 PIM domains connected to each other via a 4507 using ethernet and the 4507 has IGMP snooping turned on, how will the 4507 treat multicast traffic between the 2 domains. asuming each domain has a RP and there is a MSDP peering between domains.
what iam wondering is will the 4507 flood all multicast traffic that is from one domain to the other to all 4507 ports. Or will the 4507 not forward multicast between domains as it never sees an IGMP join.
CGMP and IGMP software components run on the Cisco router and the switch. A CGMP/IGMP-capable IP multicast router sees all IGMP packets and can inform the switch when specific hosts join or leave IP multicast groups.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...