im having this information in a log of a CISCO1921/K9
im having this sentences when i type show log in the router , could you tell me if I have a problem ??
*Apr 14 15:58:37.167 %CR:YPTO-5-GM_REGSTER: Start registration to KS 198.18.10.200 for group group1 using address 198.18.10.199 *Apr 14 15:59:47.167: %CRYPTO-5-GM_REGSTER: Start registration to KS 198.18.10.200 for group group1 using address 198.18.10.199 *Apr 14 15:59:47.235: %GDOI-5-GM_REKEY_TRANS_2_UNI: Group group1 transitioned to Unicast Rekey. *Apr 14 15:59:47.235: %GDOI-5-SA_KEK_UPDATED: SA KEK was updated *Apr 14 15:59:47.235: %GDOI-5-SA_TEK_UPDATED: SA TEK was updated *Apr 14 15:59:47.247: %GDOI-5-GM_REGS_COMPL: Registration to KS 198.18.10.200 complete for group group1 using address 198.18.10.199 *Apr 14 15:59:47.251: %GDOI-5-GM_INSTALL_POLICIES_SUCCESS: SUCCESS: Installation of Reg/Rekey policies from KS 198.18.10.200 for group group1 & gm identity 198.18.10.199
crypto isakmp policy 1 encr 3des authentication pre-share group 2 lifetime 400 crypto isakmp key XXXXXXX address x.x.x.x ! ! ! crypto gdoi group group1 identity number 1 server address ipv4 x.x.x.x ! ! crypto map map-group1 local-address Loopback100 crypto map map-group1 10 gdoi set group group1
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...