Info on a QOS class to work with dicom images across a WAN?
We are implementing a PACs imaging system across our enterprise network and will be transferring large dicom image files across our WAN. Right now I have QOS classes for voice, video and call control, with all other traffic in the default class.
I need to create a class for the dicom images so that I can guarantee some amount of bandwidth, but most importantly I want to make sure that the transfer of these large dicom image files don't choke off any other time-sensitive data in the default class.
Does dicom fall into the video streaming class? Are there any white papers dealing with QOS and dicom images? Does anyone here have experience with dicom and QOS? (thanks in advance)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...