Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Inistalling NM-1T3/E3 card in 3845 router

Hi All,

Do I need to shut down the 3845 router in order to install additional (one existing already) NM-1T3/E3 Module? Or the Module can be inserted while the router is up and 'Sh ver' gives the card information for further configuring (card type etc).

TIA

MS

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Inistalling NM-1T3/E3 card in 3845 router

The module does NOT support Online Insertion and Removal (OIR) so you need to power down the router and insert the module.  Just make sure you have the right IOS and Feature set.

3 REPLIES
Hall of Fame Super Gold

Re: Inistalling NM-1T3/E3 card in 3845 router

The module does NOT support Online Insertion and Removal (OIR) so you need to power down the router and insert the module.  Just make sure you have the right IOS and Feature set.

Re: Inistalling NM-1T3/E3 card in 3845 router

Thank you. The router got 12.4 (3d) IOS. Per docs it is good enough.

Hall of Fame Super Gold

Re: Inistalling NM-1T3/E3 card in 3845 router

Good enough indeed and thank you for the rating. 

1827
Views
0
Helpful
3
Replies