Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Inserts in GEIP+.

Dear experts

I have one problem on Cisco 7513 router.

I need to insert GEIP+ on the Cisco 7513

so I insert GEIP+ to slot3 but is not work.

Below log is the "show diag " output.

Slot 3:

Physical slot 3, ~physical slot 0xC, logical slot 3, CBus 0

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

VIP4-80 RM7000 controller, HW rev 2.04, board revision A0

Serial number: 35413536 Part number: 73-8676-02

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 22 02 04 02 1C 5E 20 49 21 E4 02 00 00 00 00

0x30: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4 Insertion time: 0xF4B18684C (00:04:38 ago)

VIP Controller Memory Size: Unknown

--Boot log begin--

Cisco Internetwork Operating System Software

IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(6), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Wed 07-Nov-01 16:00 by pwade

Image text-base: 0x600109A8, data-base: 0x603E0000

--Boot log end--

Please let me know the reason.

Thanks

5 REPLIES
New Member

Re: Inserts in GEIP+.

The GEIP+ is based on the VIP4-80.

when you show diag, output display that Controller Memory Size is *Unkown*. i`m not sure, but I think it is because of IOS version high, maybe 12.1X is suitably for GEIP+. Cisco suggestion is higher than 12.1(3)E.

but, if you have a GBIC, insert it into GEIP+(ignore system error), to our surprise, GBIC will work well on 12.2(6).

please look at this:

http://www.cisco.com/en/US/products/hw/modules/ps2643/products_tech_note09186a0080094b15.shtml

New Member

Re: Inserts in GEIP+.

Thanks for your reply.

this router has following ios version

OS (tm) RSP Software (RSP-JSV-M), Version 12.2(6), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Thu 08-Nov-01 02:22 by pwade

Image text-base: 0x600109C8, data-base: 0x619D2000

ROM: System Bootstrap, Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTLDR: GS Software (RSP-BOOT-M), Version 11.1(8)CA1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ceima1 uptime is 2 years, 4 weeks, 2 days, 5 hours, 44 minutes

System returned to ROM by reload at 15:33:21 gmt Thu Mar 31 2005

System restarted at 15:03:27 gmt Sun Jan 15 2006

System image file is "slot0:rsp-jsv-mz.122-6.bin"

Is that problem?

thanks again

New Member

Re: Inserts in GEIP+.

Hi, lee

I`ve met the same problem, then I changed IOS from 122-25 to 122-18, it was solved.

but I`m not sure 122-25 is not compatible with GEIP+. but GBIC is work well with 122-25!

it`s only a suggestion :)

regards

dongdong

New Member

Re: Inserts in GEIP+.

Dear dongdong!

As your advise,I changed IOS version from

12.2(6) to 12.1(23)E4 and it was solved.

Thanks for your advise!

Can I ask one more question?

We need to use a ENHANCED ATM DS3 PA and ENHANCED ATM OC3 SMI PA.

So thease port adapters are working in this IOS version?

Thanks again!

New Member

Re: Inserts in GEIP+.

dear lee,

please see the below:

...

PA Bay 0 Information:

ENHANCED ATM OC3 SML PA, 1 ports,FRU: PA-A3-OC3-SML

EEPROM format version 1

HW rev 2.00, Board revision A0

Serial number: 2311935 Part number: 73-2528-06

--Boot log begin--

Cisco Internetwork Operating System Software

IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(18)S9, RELEASE SOFTWARE (fc1)

...

we are using ENHANCED ATM OC3 SML PA

it`s working well

SML=Singlemode(LR) Long Reach

SMI=Singlemode(IR) Intermediate Reach

348
Views
0
Helpful
5
Replies