Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

INSTALLATION OF CALLMANGER 5.1 IS ABORTED IN MCS7825-H2

WHEN I TRIED TO INSTALL THE CALLMANGER 5.1(1B) IN MCS 7825-H2 SERVER THE FOLLOWING ERROR OCCURED AND THE INSTALL ATION IS ABORTED.THE ERROR MESSAGE WAS...

CRITICAL ERROR

[create.sh]: hrconf create argument: 1 LOGICALDRIVE Init

A selected physical device is not available for use.

Could not open log file :UcliEvt.log

controllers found : 1

Command aborted.

[create.sh]:ERROR: Cannot create SATA RAID

Could not open log file :UcliEvt.log

controllers found : 1

---------------------------------------------------------------------------------------------------------------------------------------------------------

Controller Information

--------------------------------------------------------------------------------------------------------------------------------------------------------

Controller Status : OK

Channel Description : SATA

Defunct disk drive count : 0

Logical drivers/Failed/De.... : 0/0/0

Command completed successful

.AFTER THE ABOVE ERROR MESSAGE THE INSTALLATION WAS ABORTED.PLEASE FIND THE ERROR MESSAGE AND GIVE ME THE SOLUTION FOR THIS PROBLEM.

1 REPLY
Silver

Re: INSTALLATION OF CALLMANGER 5.1 IS ABORTED IN MCS7825-H2

It is something wrong with the way the BIOS reports it. You have to let it rebuild the array and then redo the install.

320
Views
0
Helpful
1
Replies
CreatePlease to create content