Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Installing a t1 wic card

Its been awhile since Ive done this.

Is there anything I have to configure, hardware wise on a 3845 when I first install a WIC t1 dsu/csu card?

I know with the ds3 card you have to

configure card type

I have 2 t1 csu/dsu wic cards in HWIC 1 and 2....but i get no lights on the cards

and i do sh ip int br..and they are not there either

I do a sh ver and i see 2 serial cards installed.

thx

3 REPLIES
Hall of Fame Super Gold

Re: Installing a t1 wic card

Please check "show diag" and let us know which exact hardware and IOS version do you have.

New Member

Re: Installing a t1 wic card

I had a similar situation with a 2801 router. The 2800 series router only supported WIC-1DSU-T1-V2

Try this link

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html

New Member

Re: Installing a t1 wic card

I had a similar situation with a 2801 router. The 2800 series router only supported WIC-1DSU-T1-V2

Try this link

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html

648
Views
0
Helpful
3
Replies