05-13-2008 12:37 PM - edited 03-03-2019 09:56 PM
Its been awhile since Ive done this.
Is there anything I have to configure, hardware wise on a 3845 when I first install a WIC t1 dsu/csu card?
I know with the ds3 card you have to
configure card type
I have 2 t1 csu/dsu wic cards in HWIC 1 and 2....but i get no lights on the cards
and i do sh ip int br..and they are not there either
I do a sh ver and i see 2 serial cards installed.
thx
05-13-2008 12:47 PM
Please check "show diag" and let us know which exact hardware and IOS version do you have.
05-13-2008 06:22 PM
I had a similar situation with a 2801 router. The 2800 series router only supported WIC-1DSU-T1-V2
Try this link
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html
05-13-2008 06:22 PM
I had a similar situation with a 2801 router. The 2800 series router only supported WIC-1DSU-T1-V2
Try this link
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: