Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

installing V.92 on the router

is installing The Cisco Integrated V.92 Modem WAN Interface on the router for remote access will cause security concern, and one more question , How do you find if there is a modem connected and configured on the router . Thanks

2 REPLIES
Cisco Employee

Re: installing V.92 on the router

Any time you connect a device to a network, you have a security concern!  Just ensure that you have password or AAA protection on the line.

See http://www.cisco.com/en/US/products/sw/iosswrel/ps1818/products_configuration_example09186a0080204528.shtml

Silver

Re: installing V.92 on the router

Hi,

once the modem card is installed, you should see in configuration a new Async interface appearing.

You can apply all the configuration, including security commands, under that interface.

For configuration steps, you may refer to this document:

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt12pwi8.html

Cheers

Marco

223
Views
0
Helpful
2
Replies
CreatePlease login to create content