Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

installing WIC-1ENET

HI,

The software Advisor indicate me the IOS 12.1.27b (IP) for installing a WIC-1ENET in cisco 1750 router.

But the install abort with this message "PQUICC-1-UNKNOWN_WIC: PQUICC(0), WIC card has an unknown ID of 0xFF".

The router has 4M of Flash and 16M of DRAM memory and the show version indicates:

" cisco 1750 (MPC860) processor (revision 0x601) with 12288K/4096K bytes of memory

Processor board ID JAD05060L4Y (2619670584), with hardware revision 3097

M860 processor: part number 0, mask 32 "

Is it necessairy change the router chassis; or a simple upgrad for IOS and Memory; will be compatible for the WIC-1ENET?

sincerly.

Omar ATTOUMANI

5 REPLIES
Silver

Re: installing WIC-1ENET

Perhaps this is a useful resource to resolve your problem:

http://www.certfaq.com/bb/sutra95072.html

Read from bottom up!

New Member

Re: installing WIC-1ENET

WIC-1ENET requires a minimum IOS version of 12.2(4)T, which requires 8MB flash.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1700/1700cnts/cn1enet.pdf

Anonymous
N/A

Re: installing WIC-1ENET

Anonymous
N/A

Re: installing WIC-1ENET

Anonymous
N/A

Re: installing WIC-1ENET

231
Views
0
Helpful
5
Replies