Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Inter-vlan-routing ???????

Hi

i am facing problem on intervlan routing.

i have 2 vlan for depart marketing vlan 10 & account vlan 20.

On router i have define 2 sub interfaces

F0/0.1 with encapsulation dotq1 ip add 192.168.1.254/24 (market...)

F0/0.2 with encapsulation dotq1 ip add 192.168.2.254/24 (accout...)

On switches VTP server MOde default.

between router & sw-1 , on sw-1 i have define connected port as trunk... same Sw-1 to Sw-2 all connected ports are trunk ports same as for sw2 to sw-3 all connected ports are TRUNK mode.

I have define Vlan 10& 20 on Sw-2 & Sw-3 all switches.. and for test purpose on Sw-3 i have assiged 1 port to PC vlan 10 to test the connectivty ip is 192.168.1.1/24 to ping the gatway 192.168.1.254/24 but it not responding.

kindly suggest me what shouldi do ...

thanks

1 REPLY
Hall of Fame Super Blue

Re: Inter-vlan-routing ???????

Please post

1) output of "sh interface trunk" from sw1

2) "sh run" from router

Jon

95
Views
0
Helpful
1
Replies
CreatePlease to create content