02-29-2008 06:05 AM - edited 03-03-2019 08:55 PM
Hi,
we are trying to cascade cisco 2948G-GE-TX with cisco 3500XL series but the link was not getting up
pleae let me know what are may be the root cause for the above issues
regards,
Vinoth
02-29-2008 06:09 AM
Need a crossed cable perhaps.
02-29-2008 06:14 AM
But we are connecting through fibre cabble
since 3524XL-EN series a only GBIC port and on the other end 2948G has GBIC ethernet port
So let me know what may be the rootcause
Regards,
Vinoth
02-29-2008 06:20 AM
Sorry if it seems obvious, have you tried swapping the strands.
02-29-2008 06:29 AM
Can we go with connecting crosscable on the one of the port in both switch
can u help can i do the above connecting for this model 2948G with 3524XL
02-29-2008 08:53 AM
Basically, you connect fiber cable and swap it around until works. Another is using the cable to make a loopback in the port, hence proving cable and port are working.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide