Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Interface configuration for Cat3550 to Cisco828

All,

Appreciate if anyone can suggest a proper interface configuration in Cat3550 when connected to a Cisco828(which is connected to another 828 via a pair of copper cable, something like extended the LAN from Cat3550). Thanks for any responses.

2 REPLIES
Silver

Re: Interface configuration for Cat3550 to Cisco828

Please advise the detail requirement then we can help. If it is only a layer 2 connection at the 3550. There is no specific configuration required. If you want some features at 3550, please advise.

Hope this helps.

New Member

Re: Interface configuration for Cat3550 to Cisco828

Layer 2 all the way from the end 828<-->828<-->Cat3550(DHCP server sits here). I'm referring to Cat3550 fastethernet interface configuration that connects to 828 and was thinking whether something like below can help:

switchport mode access

spanning-tree portfast disable

speed 10

duplex half

no shut

Thanks.

98
Views
0
Helpful
2
Replies
CreatePlease to create content