Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

interface displaying an alarm even when "administravely down"

Customer has an E1 interface that is diplaying the alarm "Transmitter is sending remote alarm", we shutdown the interface, but alarm is still there. We didn't remove the cable. Does someone know why the alarm didn't go away with the interface administravely down?

2 REPLIES
New Member

Re: interface displaying an alarm even when "administravely down

Couple of things. Other than admin'ing down interface, you may need to admin down the controller as well.

Have you done any trouble shooting to resolve the issue?

http://www.cisco.com/warp/public/116/T1_alarms.html

HTH!!

New Member

Re: interface displaying an alarm even when "administravely down

As the interfaces are not being used, the customer just wish to stop the alarm, and will not contact the remote system. Let me check if admin down the controller may solve the problem.

243
Views
0
Helpful
2
Replies
CreatePlease to create content