I am investigating delays on a network and suspect a router might be over-taxed. This is also a fairly secure network with a lot of overhead and encryption. The following is a snippet from the show buffers command:
Public buffer pools:
Big buffers, 1524 bytes (total 55, permanent 50):55 in free list (5 min, 150 max allowed) 134357 hits, 224 misses, 284 trims, 289 created
31 failures (0 no memory)
Interface buffer pools:
Ethernet0 buffers, 1524 bytes (total 32, permanent 32): 8 in free list (0 min, 32 max allowed) 69601 hits, 82816 fallbacks
8 max cache size, 8 in cache
The failures in the Big buffers of the public pool is a small percentage of the number of hits and probably didn't effect performance, but how do I gauge the percentage of fallbacks on Ethernet0 in the interface buffer pool?
This on a 2500 model router v12.0(27), 6 days uptime.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...