Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

interface on router

Dear all


I think the function of an auxilary port is to maintanance  a router from remote place using a modem. In my concept a modem

is connected with internet and in the other end i connect a router aux port with modem, then i can do everything with that router

like console access. am i right or wrong, if i wrong please clear my concept with correct answer,

Thanks all

2 REPLIES
Cisco Employee

Re: interface on router

Hello,

You are correct. Typically, the aux port is used to connect a modem so you can manage the device remotely. Here is a configuration guide for accessing the router via aux port.

http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml

Hope this helps.

Regards,

NT

Silver

Re: interface on router

I generally put my 'out of band' managment modem on the console port instead of the aux port.  I do this because the console port will show you the boot trace; something the aux port wont do.  Also if the router is in ROMMON it's very helpful to be on the console to recover it.  The aux port is not so useful in an emergency. 


Chris

233
Views
10
Helpful
2
Replies
CreatePlease login to create content