Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

interface POS4/0 Question?

We are currently using this interface for a OC3 connection. We are now going to replace it with a DS3 line. Can I use the same card for this connection? If not which one should I use. This is for a 7204 Router.

2 REPLIES
Purple

Re: interface POS4/0 Question?

Hi,

You cannot use an OC3 card for a DS3 line. Depending on the functionality you are after, you need one of the following:

PA-A3-T3 (DS3 ATM)

PA-MC-T3 (Multi-channel DS3)

PA-T3+ (Serial - clear-channel)

Hope that helps - pls rate the post if it does.

Paresh

Purple

Re: interface POS4/0 Question?

Whoops.. should have read the subject of your post ! You cannot get POS cards on non-optical interfaces for the 7204. You will need to use one of the cards I mentioned in my first post but you cannot use POS.

Paresh

182
Views
0
Helpful
2
Replies
CreatePlease login to create content