Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

interface under WS-X6748-GE-TX module unable to apply policy map


i have a cat6509 that has the following module, im trying to apply my policy-map to int g1/3

#show module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX    
  2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP     

  3    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA     

  4    0  2 port adapter Enhanced FlexWAN        WS-X6582-2PA     

  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL   

  6    2  IPSec VPN Accelerator                  WS-SVC-IPSEC-1  

#sho ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF17, RELEASE SOFTWARE (fc1)
Technical Support:
Copyright (c) 1986-2009 by cisco Systems, Inc.
Compiled Fri 25-Sep-09 10:31 by ccai
Image text-base: 0x40101040, data-base: 0x42DDCD90

ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF17, RELEASE SOFTWARE (fc1)

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

cisco WS-C6509-E (R7000) processor (revision 1.2) with 983008K/65536K bytes of memory.
Processor board ID SMG1006N86C
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
2 Enhanced FlexWAN controllers (16 Serial).
14 Virtual Ethernet/IEEE 802.3 interfaces
76 Gigabit Ethernet/IEEE 802.3 interfaces
16 Serial network interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

policy-map qos-to
  class qos-voice
    priority percent 18
  class qos-routing
    bandwidth percent 3
  class qos-interactive-video
    bandwidth percent 14
  class qos-streaming-video
    bandwidth percent 10
  class qos-buscrit
    bandwidth percent 10
    random-detect dscp-based
  class qos-callcontrol
    bandwidth percent 6
  class qos-netmgmt
    bandwidth percent 2
  class qos-transactional
    bandwidth percent 7
    random-detect dscp-based
  class qos-bulkdata
    bandwidth percent 4
    random-detect dscp-based
  class qos-scavenger
    bandwidth percent 1
  class class-default
    bandwidth percent 25
policy-map shape-wan-to
  class class-default
    shape average 100000000
   service-policy qos-to

interface GigabitEthernet1/3
description 100 MB link

mtu 1600

bandwidth 100000
no ip address
speed 100
duplex full
wrr-queue cos-map 1 1 1
wrr-queue cos-map 2 1 0
wrr-queue cos-map 3 1 2
wrr-queue cos-map 3 2 3
wrr-queue cos-map 3 3 6
wrr-queue cos-map 3 4 7
priority-queue cos-map 1 4 5
mls qos trust dscp
arp timeout 900
crypto connect vlan 113
max-reserved-bandwidth 100


(config-if)#service-policy output shape-wan-to-rhkd118-bra01-7206
shape average command is not supported in output direction for this interface

any idea, does the module really doesnt support MQC?



Hall of Fame Super Silver

Re: interface under WS-X6748-GE-TX module unable to apply policy

Hello Mcmalinao,

a WS 6748 is a LAN linecard and does not support modular QoS that is supported for example on the flexwan modules.


QoS in C6500 configuration guide

you can have policing and outbound queueing but no shaping

Hope to help


Community Member

Re: interface under WS-X6748-GE-TX module unable to apply policy

Thanks!! Guislar!

CreatePlease to create content