Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

internet issue

hi

i have configured ADSL on my cme router and when i run debug pppoe negotiation i am getting the error like what i have attached with this mail

5 REPLIES
Silver

Re: internet issue

Appears your CHAP hostname and password do not match, therefore connection not able to peer with far end.

on router A - hostname of far-end and password

on router B - hostname of far-end and password

Passwords must match

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e64.shtml

New Member

Re: internet issue

thanks

but the hostname and password are correct

means it is the same which we got from our service provider.

Silver

Re: internet issue

is the far-end hostname redeng? because that is what is listed in config as username

New Member

Re: internet issue

far-end means 'at the service provider end' rite?

yes it is redeng

the line is correct since they are having a Dlink router and they can access internet from there

Hall of Fame Super Silver

Re: internet issue

Hello Mohamed,

from the debug ppp negotiation output we can see that the two devices don't agree on something about PAP

your side tries to use PAP

I: rx lcp frames

O: tx lcp frames

I CONFREQ [REQsent] id 166 len 14

*Nov 17 17:00:35.539: Vi2 LCP: AuthProto PAP (0x0304C023)

*Nov 17 17:00:35.539: Vi2 LCP: MagicNumber 0x2C66F4C6 (0x05062C66F4C6)

*Nov 17 17:00:35.539: Vi2 LCP: O CONFACK [REQsent] id 166 len 14

*Nov 17 17:00:35.543: Vi2 LCP: AuthProto PAP (0x0304C023)

*Nov 17 17:00:35.543: Vi2 LCP: MagicNumber 0x2C66F4C6 (0x05062C66F4C6)

*Nov 17 17:00:35.543: Vi2 LCP: I CONFREJ [ACKsent] id 7 len 8

Nov 17 17:00:35.543: Vi2 LCP: O CONFREQ [ACKsent] id 8 len 14

*Nov 17 17:00:35.543: Vi2 LCP: AuthProto PAP (0x0304C023)

*Nov 17 17:00:35.543: Vi2 LCP: MagicNumber 0x2374BF14 (0x05062374BF14)

*Nov 17 17:00:35.551: Vi2 LCP: I CONFREJ [ACKsent] id 8 len 8

I think the trouble is this line:

int dialer0

ppp pap sent-username redeng password 7 0250014A13565F2455

with this command you instruct your router to present itself as redeng but redeng is your mate.

Try again removing it

Hope to help

Giuseppe

110
Views
0
Helpful
5
Replies