Hello you all,
Iam kinda new in the field although i really like to play around with all sorts of hardware. My setup contains a dell 2900 server with ESX4 and enough resources and offcourse some cisco equipment.
My problem is as follows,
I have set up my 851/w which as you can see in the picture is directly connected with the internet. Is give's ip addresses to any client who connects on the router. So i thought let's put in a switch and connect some virtual server and you know, it works! The servers get an ip address in the same range as the client pc. Nothing funny so far but the problem arises when i put all the server in seperate VLANs i can't seem to get internet form the server side. I know the switch is capable of routing and it does route, because on the 851 i can ping the each server and vice versa. Also when i connect a pc to any other port on the switch is just give's a ip address with internet access.
Needles to say that i configured static route for each network in which a server reside on the 851 router so that is why the pings work.
What am i missing and how do i fix it,
Kind Gegards,
Henk Velthoven
The picture show the actual setup with ip addresses except the wan side because that is dynamic, also the config from both router and switch are included as attachments (some line's are omitted for brevity, hmm i have read that before ).
Accepted Solutions
velthovenh wrote:
Hello you all,
Iam kinda new in the field although i really like to play around with all sorts of hardware. My setup contains a dell 2900 server with ESX4 and enough resources and offcourse some cisco equipment.
My problem is as follows,
I have set up my 851/w which as you can see in the picture is directly connected with the internet. Is give's ip addresses to any client who connects on the router. So i thought let's put in a switch and connect some virtual server and you know, it works! The servers get an ip address in the same range as the client pc. Nothing funny so far but the problem arises when i put all the server in seperate VLANs i can't seem to get internet form the server side. I know the switch is capable of routing and it does route, because on the 851 i can ping the each server and vice versa. Also when i connect a pc to any other port on the switch is just give's a ip address with internet access.
Needles to say that i configured static route for each network in which a server reside on the 851 router so that is why the pings work.
What am i missing and how do i fix it,
Kind Gegards,
Henk Velthoven
The picture show the actual setup with ip addresses except the wan side because that is dynamic, also the config from both router and switch are included as attachments (some line's are omitted for brevity, hmm i have read that before ).
Please change the acls on your router -
access-list 2 permit 192.168.120.0 0.0.0.252
access-list 3 remark INTENET TOEGANG
access-list 3 permit 172.20.80.0 0.0.0.252
access-list 4 remark INTENET TOEGANG
access-list 4 permit 10.55.80.0 0.0.0.252
to
access-list 2 permit 192.168.120.0 0.0.0.3
access-list 3 remark INTENET TOEGANG
access-list 3 permit 172.20.80.0 0.0.0.3
access-list 4 remark INTENET TOEGANG
access-list 4 permit 10.55.80.0 0.0.0.3
Jon
