On my Internet Router, i wanted a configuration where the IMAP & SMTP should have 50% as Top Priority,HTTP 25%,FTP & others 25% should hav at the last priority, i think class-map will do this, since i dunnu much about that configuration, tell me how to do this on my router Csco 1750.
thanks for the reply. but once after doing this configuration, by downloading the ftp file,with this configuration i shud get 1ly 25% of the download for ftp, isn't? will deply this on monday & will let you, since tomorrow i won't be available in office, i will reply on monday.
i was assumed that even though there is no http flow, i thought ftp will be having only 25%, but is nice that it will utilize the 100% bandwidth if non of the traffic flow is happening & also i hope it will resume back to 25% once the http & smtp/imap traffic started flowing. sure will try this on monday & will let you know. thanks for the information.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...