10-15-2014 07:05 PM - last edited on 03-25-2019 03:42 PM by ciscomoderator
Hi,when i inserted a module with WS-X6548-GE-TX, the router 7609 displays some errors. iI am getting the following error logs
SLOT 1: Oct 16 01:05:34: %INTR_MGR-3-BURST: HY_EI_EC_INT[0x80] EARL RBus packet error [2692]
SLOT 1: Oct 16 01:05:34: %INTR_MGR-3-BURST: HY_EI_EC_INT[0x40] EARL RBus header error [3588]
SLOT 1: Oct 16 01:05:35: %INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x2] local RBus FCS1 error [3528]
SLOT 3: Oct 16 01:05:35: %INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x1] local RBus FCS2 error [2212]
SLOT 1: Oct 16 01:05:35: %INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x1] local RBus FCS2 error [2744]
SLOT 3: Oct 16 01:05:35: %INTR_MGR-3-BURST: HY_EI_EC_INT[0x40] EARL RBus header error [3324]
SLOT 3: Oct 16 01:05:35: %INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x2] local RBus FCS1 error [3312]
SLOT 1: Oct 16 01:05:36: %INTR_MGR-3-BURST: HY_EI_EC_INT[0x40] EARL RBus header error [3592]
SLOT 1: Oct 16 01:05:37: %INTR_MGR-3-BURST: HY_LS_SV_INTERRUPT[0x2] local RBus FCS1 error [3532]
Then all interface is down, cannot telnet it.
The IOS version of the router is: c7600rsp72043-ipservicesk9-mz.122-33.SRC.bin
following is the output of show inventory
NAME: "CISCO7609-S", DESCR: "Cisco Systems Cisco 7600 9-slot Chassis System"
PID: CISCO7609-S , VID: V01, SN: FOX1212G4GF
NAME: "WS-C6K-VTT-E 1", DESCR: "VTT-E FRU 1"
PID: WS-C6K-VTT-E , VID: , SN: SMT1144B241
NAME: "WS-C6K-VTT-E 2", DESCR: "VTT-E FRU 2"
PID: WS-C6K-VTT-E , VID: , SN: SMT1144B097
NAME: "WS-C6K-VTT-E 3", DESCR: "VTT-E FRU 3"
PID: WS-C6K-VTT-E , VID: , SN: SMT1144B094
NAME: "CLK-7600 1", DESCR: "OSR-7600 Clock FRU 1"
PID: CLK-7600 , VID: , SN: NWG120401NQ
NAME: "CLK-7600 2", DESCR: "OSR-7600 Clock FRU 2"
PID: CLK-7600 , VID: , SN: NWG120401NQ
NAME: "module 1", DESCR: "Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303"
PID: 7600-SIP-200 , VID: V05, SN: JAE1218GT9D
NAME: "SPA subslot 1/0", DESCR: "4-port Fast Ethernet TX Shared Port Adapter"
PID: SPA-4X1FE-TX-V2 , VID: V01, SN: JAE1209A56Q
NAME: "SPA subslot 1/2", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1 , VID: V04, SN: JAE1218GWXL
NAME: "SPA subslot 1/3", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1 , VID: V04, SN: JAE1218GWWN
NAME: "module 3", DESCR: "Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303"
PID: 7600-SIP-200 , VID: V05, SN: JAE1217FNRM
NAME: "SPA subslot 3/0", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1 , VID: V04, SN: JAE11485CXH
NAME: "SPA subslot 3/1", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1 , VID: V05, SN: SAL1551Z6YG
NAME: "SPA subslot 3/2", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1 , VID: V03, SN: JAB103504NV
NAME: "module 5", DESCR: "RSP720-3CXL-GE 2 ports Route Switch Processor 720 Rev. 5.9"
PID: RSP720-3CXL-GE , VID: V09, SN: JAE1215DWHB
NAME: "msfc sub-module of 5", DESCR: "7600-MSFC4 C7600 MSFC4 Daughterboard Rev. 1.1"
PID: 7600-MSFC4 , VID: 000, SN: JAE1215EEAD
NAME: "switching engine sub-module of 5", DESCR: "7600-PFC3CXL Policy Feature Card 3 Rev. 1.0"
PID: 7600-PFC3CXL , VID: 000, SN: JAE1214DGBG
NAME: "module 6", DESCR: "RSP720-3CXL-GE 2 ports Route Switch Processor 720 Rev. 5.9"
PID: RSP720-3CXL-GE , VID: V09, SN: JAE14030PH2
NAME: "msfc sub-module of 6", DESCR: "7600-MSFC4 C7600 MSFC4 Daughterboard Rev. 1.5"
PID: 7600-MSFC4 , VID: 000, SN: JAE14020FFY
NAME: "switching engine sub-module of 6", DESCR: "7600-PFC3CXL Policy Feature Card 3 Rev. 1.1"
PID: 7600-PFC3CXL , VID: 000, SN: JAE14020IMG
NAME: "module 9", DESCR: "Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303"
PID: 7600-SIP-200 , VID: V05, SN: JAE140311QP
NAME: "SPA subslot 9/0", DESCR: "8-port Fast Ethernet TX Shared Port Adapter"
PID: SPA-8X1FE-TX-V2 , VID: V02, SN: JAE15300AUJ
NAME: "SPA subslot 9/1", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port Adapter"
PID: SPA-8XCHT1/E1 , VID: V04, SN: JAE1220HUWC
NAME: "SPA subslot 9/2", DESCR: "1-port Channelized OC3/STM1 to DS0 Shared Port Adapter"
PID: SPA-1XCHSTM1/OC3 , VID: V03, SN: SAL1648TCE7
NAME: "subslot 9/2 transceiver 0", DESCR: "OC3 IR-1/STM1 S-1.1"
PID: SFP-OC3-IR1 , VID: A , SN: SPC16450E9N
NAME: "FAN-MOD-9SHS 1", DESCR: "High Speed Fan Module for CISCO7609-S 1"
PID: FAN-MOD-9SHS , VID: V01, SN: FOX1212G15N
NAME: "FAN-MOD-9SHS 2", DESCR: "High Speed Fan Module for CISCO7609-S 2"
PID: FAN-MOD-9SHS , VID: V01, SN: FOX1212G15M
NAME: "PS 1 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 1"
PID: WS-CAC-3000W , VID: V01, SN: AZS11490ECW
NAME: "PS 2 WS-CAC-3000W", DESCR: "AC power supply, 3000 watt 2"
PID: WS-CAC-3000W , VID: V01, SN: AZS11490EC7
10-16-2014 01:38 AM
Looks to be hardware issue.
Have you tried replacing the module?
HTH
10-16-2014 04:18 AM
replace the WS-X6548-GE-TX module? I inserted it on last Wednesday, the case is also occurred. Then I applied for a RMA. Yesterday, I have already used the new one. but it still so.
10-16-2014 04:49 AM
Could yoiu please open a TAC case as there are few things which we would like to check?
10-16-2014 05:18 AM
I opened the case last week. TAC suggested that replace the module. In fact , it is not useful.
Now I used a new chassis, but I don't know, When the module is inserted, what's happen.
I will open a case again to solve it.
Thank you.
10-16-2014 08:59 PM
Ghostmiki,
The above messages indicate to us that the packets are getting corruption the
Result-Bus(RBus) and there are multiple causes for this, which are all hardware level
issue:
-the module is not seated properly or its connectors have failed.
-the backplane on its slot has been damaged.
-the supervisor or damaged backplane on its slot.
HTH
Regards
Inayath
11-04-2014 06:43 PM
Inayath,
I find a doc said the RSP720-3CXL-GE supervisor cannot support this module.
Is this right?
http://www.cisco.com/c/en/us/products/collateral/routers/7600-series-routers/product_data_sheet0900aecd8057f3b6.html
Thanks
Ghostmiki
11-05-2014 01:49 AM
No, This module is supported by this Supervisor.
HTH
11-05-2014 05:33 PM
Ok. I will try to replace the chassis. Thanks for your help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: