using E1s spanned over long(1000km) distance with IMA makes problem i.e. causing drops in packets in this case maximum differential delay being used is 25ms i have also tested the same thing over greater max. differential delay(100ms).
But using the same E1s without IMA causes no problem but this is not a solution & causes lots of overhead, i've to exploit IMA.....
One more thing using E1s in IMA spanned over short distances are working perfect.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...